A simple and dependable short travel dropper for fast gravel descents. The inverted design allows use of seat packs without need for any special adaptors or attachments.
The placement of the cartridge makes for a post that can be cut to the desired length for a potential weight loss of 40g from the initial 375g package.
Finally, with 25 degrees of saddle tilt adjustment and shims included for 30.9mm and 31.6mm seat tubes, the G Series Dropper Seat Post is compatible with a wide variety of gravel bikes.
The dropper post is compatible with cable-actuated remote dropper levers. 40mm of drop 375g, with up to 40g in cuttable weight savings.
Compatible with most cable-actuated dropper post remote levers 27.2mm diameter (Included with shims for 30.9mm and 31.6mm) Fully serviceable
40mm of drop puts a rider in a more comfortable and manageable position to descend faster.
The inverted design of the G Series Dropper Seatpost delivers greater reliability, longer service intervals, weight reduction, and a best-in-class stack height. The class leading stack height is achieved by designing the post to position the dropper’s cartridge to extend up between the saddle rails. This means that many riders who couldn’t fit a dropper post on their gravel bike due to limited seat post clearance will now be able to take advantage of the benefits that come with adding a lower center of gravity to their gravel experience.
Incorporating premium grade bushings, brass vs plastic anti-rotation keys, and a high-quality gravel-tuned, fully sealedcartridge, the G Series Dropper Post is designed around simplicity tooffer the durability required for the abuses it will endure. While service intervals and requirements will vary rider to rider, new life can be breathed into the dropper post via new seals and bushings. In the instance that a worn-outcartridge needs to be replaced, you simply pull the old one out and drop a new one in. No air, no oil, no mess. Function-first simplicity at its best.
DIAMETER: 27.2mm (Includes shims to fit 30.9mm and 31.6mm)
OFFSET: 0mm TRAVEL: 40mm
CABLE ROUTING: Internal
MATERIAL: Alloy LENGTH: 350mm (Can be trimmed down to 220mm)
MIN INSERTION: 75mm
MAX INSERTION: 210mm
STACK HEIGHT: 145mm