Unior 2 in 1 Pocket Spoke and Cassette Lockring Tool
2 in 1 Pocket Spoke and Cassette Lockring Tool
Material: special tool steel, hardened and tempered
Surface finish: blacken to standard DIN 50938
The wrench is the basic working tool for cyclists extended tours.
To change broken spokes on the right side of the rear wheel, the cassette has to be removed first.
Firstly remove the rear wheel, than fit the tool onto the freewheel nut. Replace the rear wheel, so that the square edge of the tool presses to the frame or derailleur hanger. After that, push the pedals in the forward direction and loosen the freewheel nut. Remove the cassette and replace the broken spoke. In order to prevent the possibility that the paint on the bicycle frame is damaged, a protective plastic plate should be inserted between the key and the frame.
Good Rotations is an independent online bikepacking and adventure cycling store.
If you are looking for a complete brevet or expedition setup, advice on gear, or help with finding the right bikepacking bag or dynamo system, we're here to assist.